The most common placement method is the balanced plug technique. The work-string is run into the wellbore to the desired depth for the plug base. Contamination or mixing with the control fluid is avoided by the use of appropriate volumes of spacer or chemical wash. These are pumped ahead of and behind the cement slurry […]
Highly deviated or Horizontal well section abandonment?
I have to be honest, it is only recently that I had the opportunity to place frequent cement plugs in such conditions and purpose. Yes, I did those only occasionally before … However, “Frequency” is important, and beside what everybody knows (so-called best practices) Frequency is how the significance of all the variables can be […]
Drill deeper or just plug it off?
A quick reminisce… Over the years, I have had the opportunity to work with many drilling teams. I have to say, some of them still occupy a very special place in my heart. Not only because of the quality of the people I had the pleasure of working with; but also for the amazing things […]
Balance to succeed: Cement Plugs in losses situation
Loss circulation challenges During my time in Mexico, one of the main challenges That we faced was severe loss circulation. In new wells, due to the presence of fractured carbonates and low formation pressure (LPHT), several actions were usually in place. Examples include managed pressure cementing (cementing taking advantaged of MPD equipment/practices). Or the use […]
Some guidelines for Cement Plugs
Here are the primary considerations that need to be top of mind when dealing with cement plugs. We think that all the most relevant ones are here, and can serve as a revision checklist. We’d welcome any additional suggestions to add to the page. Use a cementing stinger and cover both the cement and spacer […]
Cementing Engineering Services
Its been a tough couple of years… After all the time in this challenging industry, the last few years have been incredibly interesting. I know most people consider this previous couple of years probably the worse for the oil industry ever and if we go by numbers that is correct. However, despite this undeniable truth, […]
Recent Comments